High Voltage Servomotor Driver for High Performance DMC Systems

February 2nd, 2012

Toronto, Canada – GAO Embedded is offering its high voltage servomotor driver for high performance digital motor control (DMC) systems. It is based on Texas Instruments’ TMS320F2812 DSP and is intended for use as a packing mechanism, USP, variable frequency control and electrical control.

This high voltage servomotor driver, model MCK2812HV, is part of a reliable and fast servomotor driver solution that consists of three parts including an EVM2812 board (DSP part), an HVD and an IB2812 (interface part). It uses an IPM module to protect the board from over-current, over-voltage, under-voltage and over-heating. It provides an on-board 60 W rebounding power switch to supply large current for a safe system and an on-board filter to minimize EMI interference based on the FCC-15 standard.

This practical HV servomotor driver has a high speed optocoupler for electrical isolation and provides 8 channels of isolated output. When operating along with GAO’s EVM2812 board, it can directly connect with DC brush/brushless servomotor, AC asynchronous motors, AC permanent-magnet synchronous servomotors and stepper motors to form a digital servo motion control system.

The high performance servomotor driver offers a Hall Effect current sensor to ensure the accuracy and isolation of current sampling and has 8 channels of isolated output to meet basic requirements for power supply. It also provides a PWM frequency of up to 20 kHz and uses a non-inductive absorbing capacitor to eliminate surges and spikes caused by DV/DT effectively protecting IPM.

This high voltage servomotor driver belongs to GAO’s family of TI DSP Evaluation Board. A similar product in this line is MCK2812 LV (Low Voltage) Servomotor Driver. This line also includes 2812EVM-II Evaluation Board specially optimized for motor driving and control systems, and TI DSP Evaluation Boards which avoid electro-magnetic interference (EMI) to the computing unit by using an independent power supply for A/D sampling. This line of products serves the needs of electronic professionals internationally.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

Low Frequency RFID Reader Module

January 19th, 2012

Toronto, Canada - GAO Embedded has launched this low frequency RFID reader module designed to be a direct replacement for magnetic stripe reader modules to convert existing applications and hardware to RFID technology. This module allows existing installations to retain most of their hardware infrastructure and change to more secure RFID technology.

This RFID reader module, model 711001, operates at a frequency of 125 kHz and reads EM compatible transponders at a distance of up to 80mm under ideal conditions. It has passed CE and FCC technical certification and is available with several frequencies and RFID coding options. It features low power consumption and a built-in antenna, ABS housing which allows robust operation. This low frequency RFID reader module provides MSR, ABA and Track 2 interfaces for data communication.

This low frequency RFID reader module belongs to GAO’s family of RFID Embedded Modules. This line of RFID embedded modules are easy to integrate into many LF/HF RFID applications. This line also includes 13.56 MHz (HF) High Frequency RFID Reader Module Chip, 13.56 MHz (HF) High Frequency RFID Reader Module Kit, and 13.56 MHz HF RFID Reader Module Substitute – Mag Stripe which are ideal for system integrators providing a high performance, cost-effective platform to provide almost any device with RFID reader technology, and some similar products.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags: ,
Posted in GAO Embedded News | No Comments »

Embedded UHF Reader Module Features Anti-Collision

January 12th, 2012

Toronto, Canada – GAO Embedded is offering its embedded UHF reader module which leads the industry in embedded UHF reader performance. It offers a combination of high performance and a compact footprint. It is specifically designed for applications that share common requirements for tag support, protocol and performance such as inventory management, asset tracking, patron management and personnel tracking.

Featuring anti-collision, this compact embedded UHF reader module, model 716003, allows up to 50 tags to be read in a single read operation and boasts a long read distance of up to 5 m. It operates at a frequency of 860 to 960 MHz. This reader module features ease of operation, simple integration through its included API, investment protection through field upgradable software and performance optimization via its 10 to 30 dBm power control and noise reduction technology. A variety of host interfaces including 9.6 to 115.2 kbps UART (TTL), USB and SPI & I2C are also provided. The embedded reader is especially suitable for use in handheld/mobile readers, doorway readers, printers/encoders, and smart-cabinets/shelves.

This compact embedded UHF reader module belongs to GAO’s family of RFID Embedded Modules. This line includes a variety of RFID modules such as 13.56 MHz. HF High Frequency RFID Reader Module Chip, 13.56 MHz. RFID M1mini module, 13.56 MHz. M4 Development Kit with 1M4 MH Module and other similar products. This line of RFID embedded modules is easy to integrate into many LF/HF RFID applications. They provide a high performance and cost-effective platform for embedding into other devices. This family offers GAO’s customers valuable choices. GAO’s family of RFID embedded modules are designed and manufactured with recognized industry standards relevant to RFID.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

Interface Board Optimizes the Performance of 28X DSPs

January 5th, 2012

Toronto, Canada - GAO Embedded has launched this interface board for use with the EVM2812 DSP development board using a TMS320F2812 DSP chipset in order to extend control functions for digital motor or machine control, packing mechanisms, UPS, VFC (Variable Frequency Control) and electrical control.

Operating with EVM2812 via MCBUS, this interface board, model IB2812, optimizes the performance of 28X DSPs. When working along with MCK2812 L/HVD and EVM2812 evaluation board, it forms a complete digital servo motion control system. This interface board offers 6 channels of PWM output, 6 PORTB I/O for the keys and LEDs, CAP input, and 8 channels of AD input either AD0-7 or AD8-15. It also provides special purpose chips with SPI interfaces to manage the nixie tube display and keys. Additionally, users can fully utilize each of the on-chip function pins, for example, to define PWM, A/D, I/O and capture.

This interface board belongs to GAO’s family of TI DSP Evaluation Boards. The line includes two similar products: 2812EVM-I TI DSP Evaluation Board and 2812EVM-II Evaluation Board which is an upgrade of its GAO 2812EVM-I. They are specially optimized for motor driving and control systems based on MS320F2812 series DSPs. The line also includes MCK2812 LV (Low Voltage) Servomotor Driver and MCK2812 High Voltage Servomotor Driver and some other similar products.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

TI DSP Evaluation Board for Scientific Research and Product Development

December 22nd, 2011

Toronto, Canada – GAO Embedded is offering its TI DSP evaluation board, which is well-suited for prototyping, study and experimentation in applications including scientific research and product development. It can be easily integrated in a user’s system and is an ideal device for high performance DMC systems.

This TI DSP evaluation board, model DEC6713, is based on Texas Instruments’ TMS320C6713B DSP, a 32 bit floating point DSP operating at a frequency of 200 MHz at a maximum speed of up to 2400 MIPS. It provides an on-board VL-Bus, data/address/control lead-out wires and special function pins with lead-out wires. It has both extended shielded and unshielded interrupt inputs and can be used with removable storage devices. In addition, it has an MP3 decoding chip, a 10 M Ethernet interface, a USB host interface and 3.5 mm audio jacks for MIC, line-in and phone.

Source code for testing CCS, PWM, ADC, SPI, SCI, CAN communication, FFT, DC brush/brushless motors and AC motors SPWM and SVOWM is provided. It uses an independent power supply for A/D sampling, which effectively reduces electro-magnetic interference (EMI) to the computing unit.

This evaluation board belongs to GAO’s family of TI DSP Evaluation Board. The line includes two similar products: 2812EVM-I TI DSP Evaluation Board and 2812EVM-II Evaluation Board which is an upgrade of its GAO 2812EVM-I. They are specially optimized for motor driving and control systems based on MS320F2812 series DSPs. The line also includes MCK2812 LV (Low Voltage) Servomotor Driver and MCK2812 High Voltage Servomotor Driver and some other similar products.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

Low Voltage Servomotor Driver Intended for High Performance DMC Systems

December 15th, 2011

Toronto, Canada – GAO Embedded offers its low voltage servomotor driver which is designed for use as a packing mechanism, USP, variable frequency control, electrical control or high performance digital motor control (DMC) system.

This reliable and fast servomotor driver, model MCK2812 LV, is based on a high-performance TMS320F2812 DSP core and peripherals from Texas Instruments and consists of three parts: the EVM2812 board (DSP part), this LVD (driver part) and the IB2812 (interface part). The evaluation board directly connects with one or two DC brush/brushless servomotors, AC asynchronous motors, AC permanent-magnet synchronous servomotors or stepper motors to form a digital servo-motion control system.

This low voltage servomotor driver is equipped with a special driver chip and a 20 A/200 V MOSFET tube protecting against over-current, over-voltage, under-voltage and over-heating. It boasts an on-board 30 W rebooting power switch which is able to supply a large current for a safer system. It also offers an on-board filter to reduce EMI interference according to FCC-15 standard and on-board precise resistors to perform three-phase current sampling with accuracy. The evaluation board utilizes a 24 V to 80 V DC power supply that provides a maximum peak value current of 10 A and an output power of up to 400 W. It has an input interface for incremental photoelectric encoder signal and hall sensor signal. Also a feedback interface is provided for current, velocity, position feedback loop.

This reliable servomotor driver belongs to GAO’s family of TI DSP Evaluation Board . Some featured products in this line includes High Voltage Servomotor Driver, 2812EVM-II Evaluation Board specially optimized for motor driving and control systems, and TI DSP Evaluation Boards which avoid electro-magnetic interference (EMI) to the computing unit by using an independent power supply for A/D sampling. This line of products serves the needs of electronic professionals internationally.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

XDS510 USB 2.0 Enhanced TI DSP Emulator Supports Multi-DSP Emulation

December 8th, 2011

Toronto, Canada - GAO Embedded has announced the release of its XDS510 USB 2.0 enhanced TI DSP emulator with drivers for both CCS3.3 and CCS2.x. The USB TI DSP emulator conducts hardware detection in the event of power failure or cable disconnection. It emulates TI’s TMS320C2000/3000/5000/6000 DSPs, as well as, C3X/4X/5X/8X, OMAP OMAP1510/1610/1710/2420/310/5910.

This easy-to-use TI DSP emulator, model A0M00003, is compatible with Windows 98/NT/2000/XP operating system and is equipped with a standard high-speed USB 2.0 interface and JTAG emulation interface that saves computer resources. It offers flash programming for F28x/F240x/F24x/F20x. The emulator features high emulating speed and real time data exchange (RTDX) with data transfer rates of up to 480 MB/s. It also has a real-time event sequence server that is severable without service interference. It is self-regulated to the DSP voltage of the target board.

The high performance TI DSP emulator features a compact size, plug-and-play operation, a high operating speed and multi-DSP emulation. It is capable of preventing the system from crashing and becoming non-rebootable when the power of target board goes off.

This hot-pluggable TI DSP emulator belongs to GAO’s family of TI DSP Emulators &Debuggers. This line of products also includes XDS510PP JTAG Scan Path TI DSP Emulator Pod which is designed for hardware and software debugging and flash programming, XDS510 USB Plus JTAG Emulator which uses XDS560 JTAG technology to greatly improve its stability and anti-interference capabilities and XDS560 USB-PLUS Emulator which has a high download speed of 500 kb/s. This line of emulators and debuggers serves the needs of electronic professionals internationally.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

TI DSP Evaluation Board Immune to Electro-magnetic Interference from Computing Unit

December 1st, 2011

Toronto, Canada – GAO Embedded is offering its TI DSP evaluation board which is based on the TMS320F2812 DSP from Texas Instruments. This evaluation board is an ideal tool for research and development, experimentation and for scientific research.

This high-performance TI DSP evaluation board, model 2812EVM I, provides both extended shielded and unshielded interrupt inputs and offers on-board VL-Bus data/address/control lead-out wires and special function pins also with lead-out wires. It has 128 k × 16 bits on-chip flash program memory, 18 k × 16 bits on-chip and 64k × 16 bits extended SRAM, a CAN 2.0 interface and 2 kb serial EEPROM. It also boasts a 10 M Ethernet interface compatible with NE2000 as well as Interface/Driver circuitry for DC motor and Servomotor control.

The evaluation board is immune to electro-magnetic interference (EMI) from the computing unit by using an independent power supply for A/D sampling. The module has a 32-bit fixed-point Flash DSP operating at a frequency of 150 MHz. Source code for testing CCS, PWM, ADC, SPI, SCI, CAN communication, FFT, FC brush/brushless motors and AC motors SPWM and SVOWM is provided. In addition, this optimized module with driver and control systems has eight LED indicators which give status feedback and has two RS232 interfaces for data exchange.

This TI DSP evaluation board belongs to GAO’s family of Embedded Development Tools. Some featured products in this line includes XDS510PP JTAG Scan Path TI DSP Emulator Pod which is commonly used for debugging hardware , debugging software, and flash programming, 2812EVM-II Evaluation Board specially optimized for motor driving and control systems, and  XDS510 USB 2.0 Enhanced TI DSP Emulator featuring a compact size, plug-and-play operation, a high operating speed and multi-DSP emulation. This line of products serves the needs of electronic professionals internationally.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

TI DSP Evaluation Board for Scientific Research and Product Development

November 24th, 2011

Toronto, Canada – GAO Embedded is offering its TI DSP evaluation board with a 32-bit fix-point Flash DSP operating at 150 MHz. It is an ideal tool for applications such as scientific research and product development.

This TI DSP evaluation board, model A0M10002, provides on-board VL-Bus data/address/control lead-out wires and special function pins also with lead-out wires. It features on-chip flash program memory, on-chip and extendable SRAM and extendable EEPROM. The board offers standard RS232, CAN communication interfaces for data exchange. On board IEEE1149 JTAG interface is also provided for real-time emulation.

It uses custom designed power supply with reference voltage to provide superior accuracy of A/D sampling. Source code for testing CCS, PWM, ADC, SPI, SCI, CAN communication, FFT, DC brush/brushless motors and AC motor SPWM and SVPWM is provided. This module forms a complete digital servo motion control system by interfacing with one or two L/HVD (Low/High Voltage Driver) boards to drive one or two motors.

This evaluation board belongs to GAO’s family of TI DSP Evaluation Board. The line includes two similar products: 2812EVM-I TI DSP Evaluation Board and 2812EVM-II Evaluation Board which is an upgrade of its GAO 2812EVM-I. They are specially optimized for motor driving and control systems based on MS320F2812 series DSPs. The line also includes MCK2812 LV (Low Voltage) Servomotor Driver and MCK2812 High Voltage Servomotor Driver and some other similar products.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

S3C2440 Core Board Provides a Complete Set of Common System Peripherals

November 17th, 2011

Toronto, Canada – GAO Embedded has announced the release of its S3C2440 core board which is based on the ARM920T core. It operates at 400 MHz and fully supports Windows CE4.2/5.0, 6.0 and Linux2.6 operating systems and integrates 64 MB SDRAM, 64 MB NAND Flash and a wide range of peripherals into one unit. This smart core board can be easily deployed to various applications such as industrial data acquisition and processing, intelligent instrumentation and metering, industrial control, medical appliances, network servers, and handheld devices.

By providing a complete set of common system peripherals such as Mini USB Host/Device interface, Mini SD Card interface, Ethernet interface, camera interface and Audio I/O interface, this core board, model B0M00002, minimizes overall system costs and eliminates the need to configure additional components. The I/O interfaces are extendable for further development. The compact core board also features RTC with calendar function and on-chip clock generator with PLL. In addition, it offers a LCD controller with LCD-dedicated DMA and has variety of power supply methods.

This smart core board belongs to GAO’s family of Embedded Development Tools. Some featured products in this line includes TI DSP Evaluation Boards which offers on-board VL-Bus data/address/control lead-out wires and special function pins with lead-out wires, 2812EVM-II Evaluation Board specially optimized for motor driving and control systems, and  XDS510 USB 2.0 Enhanced TI DSP Emulator featuring a compact size, plug-and-play operation, a high operating speed and multi-DSP emulation. This line of products serves the needs of electronic professionals internationally.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoembedded.com

Tags:
Posted in GAO Embedded News | No Comments »

« Older Entries