A Member of GAO Group - Celebrating 15 Years of Innovation
  HomeFAQShipping Partnership About UsContact UsNewsCareer
   
 

13.56 MHz. RFID M2 Module


Call for Price
Contact Us


Ordering part - 13.56 MHz. RFID M2 Module

713008 - CF-format
713009 - MH-format

Overview - 13.56 MHz. RFID M2 Module

The SkyeModule™ M2, industry's most secure multi-protocol embedded HF RFID reader module for OEMs, was designed specifically for contactless financial transactions and encrypted authentication across a range of vertical markets.

Based on the same security standards used by the U.S. Department of Defense and financial sector, the SkyeModule M2 provides rich HF tag/protocol support and optimal performance for RFID embedded applications.

The SkyeModule M2 has been created specifically for several applications that share common requirements for tag support, protocol, performance, and security.

Features - 13.56 MHz. RFID M2 Module

  • Miniscule footprint - 49% smaller than a business card
  • Greatest tag compatibility with Tagnostic® and TagIQ™
  • Minimal power consumption and maximum read range
  • Software Adjustable Host Interfaces: UART (TTL), SPI, USB
  • 7 General Purpose I/O
  • Peripheral devices for encryption algorithms and key storage
  • Simple and intuitive API

Applications - 13.56 MHz. RFID M2 Module

  • Anti-counterfeiting
  • Contactless Payment
  • Handheld Reading/Encoding
  • Item-Level Inventory Management
  • Patron Management
  • Patient Safety
  • Printing/Encoding

Software and Security - 13.56 MHz. RFID M2 Module

SoftwareReaderWare (RW) EncryptionRW Clone/Tamper Protection
ReaderWare C APIDES, 3DES & AESSHA & MD5 secure hashing
SkyeTek Protocol v3MIFARE and CryptoRF1 supportPseudo-Random Number
Field upgradeable firmware bootloaderExtensible security via SAMGenerator (PRNG)

Transponder Support - 13.56 MHz. RFID M2 Module

Air-Interface2ManufacturerProduct NameMemory (bits)
ISO14443ANXP (Philips)MIFARE Ultralight512
ISO14443ANXP (Philips), InfineonMIFARE8k, 32k
ISO14443ANXP (Philips)DESFire32k
ISO14443BAtmelAT88RF020, AT885C CryptoRF12k, 1k to 64k
ISO14443BST MicroelectronicsSR176, SRI512, SRIX4K176, 512, 4k
ISO15693FujitsuMB89R11816k
ISO15693Infineonmy-d (limited)2k
ISO15693NXP (Phillips)I-CODE SL1, SL2 ICS10, SL2 ICS20

512, 136, 1k

ISO15693ST MicroelectronicsLRI-64,-512,-2K, -2KS64, 512, 2k
ISO15693TagSysC3701k
ISO15693Texas InstrumentsTag-it HFI Std, Pro, Plus256, 2k
ProprietaryNXP (Philips)I-CODE SL1 ICS30, EPC SL2 ICS10136, 512

Frequency

13.56 MHz ± 7 kHz

Peripheral I/O Connection7 programmable GPIO pins

ISO 7816 smart card slot

Current ConsumptionSleep Mode: 4 mAIdle Mode: 75 mA

Scan Mode: 175 mA

Physical CF MHLength: 66 mm 70 mmWidth: 36 mm 53 mmHeight: 5 mm 9 mm

Weight: 8.7 g 10.5 g

Compliance3FCC 15.225 EN 300-330EN 301-489 EN 61000-4-3AS/NZS 4268:2003 DGT LP002HKTA 1035 IDA TS SRD

RoHS

Antenna Options

Internal or 50 Ω MMCX (female)

output for external connection

EnvironmentStorage Temperature: -20°C to 85°C

Operating Temperature: -10°C to 70°C

TransponderCommunication RateISO 14443A: 106 kbpsISO 14443B: 106 kbps

ISO 15693: 26 kbps

Effective RangeVicinity, Internal Antenna: 8 cmVicinity, External Antenna: 16 cmProximity, Internal Antenna: 3 cm

Proximity, External Antenna: 8 cm

Host Interfaces/Data RatesRS232 (Serial UART): 9.6-115.2 kbpsSPI: Mode 1 up to 4 Mb/sUSB: 2.0 Full Speed 12 Mb/s

I2C: 40 kHz

Air-interface ProtocolsISO 14443 A/B (parts 1-4)

ISO 15693

Output PowerAdjustable between 17-23 dBm sustained(read range and rate are subject to

specific environmental conditions)

Supply Voltage

5.0 V ± 10%


 | Home | FAQ | Shipping Info | Warranty | About Us |  Site Map | News | 
GAO Embedded specializes in
XDS510, EVM2812, TI DSP Motion Control Kit, TI DSP Servomotor Development Boards
TI DSP Evaluation Boards, Ti DSP XDS510, IB2812, BMCK2812, MCK2812
TI DSP Emulators & Debuggers, Programmer Adapter, DES6713, Universal Programmers